Share your DCCOR Experience

@Anonymous

I think question A is the right answer:

A NX9K(config)# interface loopbackO
NX9K(config-if)# ip address 10.10.10.11/32
NX9K(config)# interface VLAN10
NX9K(config-if)# ip unnumbered loopbackO
NX9K(config)# interface nve1
NX9K(contig-if-nve)# source-interface loopbackO

Passed exam!
Passleader has now the current questions, but you have to check questions as they intend to put wrong answers…

My recommendation for everyone is to invest more time in studying and then do a dumps.

@dalabu did u study from PL 357 question?

@Toni

yes, one of them was also PL 357.

@dalabu is the 357q enough to pass? If not, wha other material did u use to study?

DAVID PABLO all saying pass with david dump are SCAMMERS FAKE FAKE FAKE

DAVID PABLO all saying pass with david dump are SCAMMERS FAKE FAKE FAKE

DAVID PABLO all saying pass with david dump are SCAMMERS FAKE FAKE FAKE

@David is a scam & @dalabuy

Did you go with the Passleader dumps? How accurrate are they? do they contain the new questions?

Has any1 recently purchased? suggests they updated on 12th

@Strikerr
I did not, I did mine before that, so, more or less accurate, those are in fact the new q´s as far as I can tell. I suggest going over examtopic´s comment section for the right answers on the old stuff also.

passed 2 days before with 96% There were 3 new qs,

𝔨𝔳𝔱𝔣.𝔱𝔨

CCNP and CCIE Data Center Core DCCOR 350-601 Official Cert Guide has so many errors, its frustrating. Im writing on Wed 26th of Jan, examtopics is enough to prepare after finishing the book?

Thanks in advance

Has anyone tried to take the CCIE DC Lab in the last year (since Cisco updated it to version 3.0?)

Anyone with passleader dump for dccor please share. Am writing monthend

Would you please share the valid dumps with me.#Fahim.cisco7@@@gmail.com####.
Thanks Friends

I passed the exam today too since few minutes, all the questions were the same ones i revised in David dump, i highly recommand it, happy to share with you that.

if any one want to buy dummy on s p o t o, i already buy.
just send message if u want to buy it.
se t i a wa n dim dim @ g mail . co m
valid untul Jan 29, 2022.

Thanks

@Jonathan,
Could you please share the dumps. ##fahim.cisco7@@gmail.com#
Thanks

A Cisco ACI engineer must configure an access port on a Cisco ACI leaf switch The access policy should be configured so that it supports L30ut connectivity concurrently with
several EPGs that are mapped to this interface with the static port method How should the access policy be configured?

A by linking the interface policy group to multiple Attachable Access Entity Profiles
B with two interface policy groups that are linked to the same interface profile port selector
C. by mapping a single physical domain, mapped to the L3out and EPG interfaces
D with a single Attachable Access Entity Profile that is linked to the corresponding routed domain and physical domain

Answer D — a l3out needs a separate routes domain and a static port binding also needs a separate physical domain

Which NFS version uses the TCP protocol and needs only one IP pan to run the service?
A NFSvl
B. NFSv2
C. NFSv3
D NFSv4

Just took my Exam. All the questions were the same as on the David dumps.
For studying purposes I used the CBT nuggets online course and completed it in 6 months.

An engineer evaluates a Ul-based infrastructure management system capable of monitoring and deploying standalone VXLAN BGP EVPN deployments. The storage
administrators also need the solution to manage the Cisco MDS 9000 Series Switches. Which solution meets these requirements?
A Cisco DCNM
B Cisco Tetration
C Cisco UCS Director
D Cisco Intersight

What is the answer?

Anybody has the cbt nuggets for 300-601?

Does anyone know if 357q good enough?

@The guy
Can u share the dump please to lena_n88 at yahoo dot com

Is the pass leader dump with 357 Q valid ?

@mohamed mostafa
Please can you send me the dump to lena_n88 at yahoo dot com

Anyone with passleader dump for dccor please share.

@Guys
Would you please share the dumps. ##fahim.cisco7@@gmail.com#

Passed too today using David dumps v2. The questions were the same ones i found on the exam.

@John
Can you share your dump here please

Test posting here folks, somehow my postings are not showing up…….

Would you please share the dumps. ##fahim.cisco7@@gmail.com#

I passed the exam DCCOR on JAN 26, 2022.
u can send email to me if u want the best DUMP.
THX

@ suckseed
Please can you send me the dump to lena_n88 at yahoo dot com

@Suckseed

Please can you share it with indunildissa @ gmail dot com

@Suckseed
Please can you share it with rperez @ remtel dot cl

@dalabu
@toni
Can you share the 357q to me to lena_n88 at yahoo dot com
Pleas

@Sukceed
Would you please share the dumps. ##fahim.cisco7@@gmail.com#
Thanks

I will take the exam tomorrow if anyone have any questions send to me please
Lena_n88 @ yahoo. com

HI Guys, is there any way to get cbt nuggets for DCCOR for free ?

Thanks,
doko

Hello guys, Can someone please share the dumps to {email not allowed}?

Hello guys, Can someone please share the dumps to datacenter958(at)gmail.com?

hi all,
Just passed my exam since 1 hour, it was easy with dumps.
This is the materials i used, udemy courses and David dumps (all questions were the same).
Next Juniper Exams.

@Hassan
Can you share the dump please to lena_n88 at yahoo dot com

Pls send me dump on technology123go at gmail dot com

An engineer is performing an ISSU upgrade on the Cisco MDS 9000 Series Switch. What is the
impact on the control plane of the switch?
A. It remains down until the next reboot.
B. It remains up throughout the update.
C. It remains down for more than 80 seconds but less than 140 seconds.
D. It is down for less than 80 seconds.
Answer: D

An engineer must configure OSPFv2 connectivity between a pair of Cisco Nexus switches. The
connection between the switches must meet these requirements:
– Use unicast for updates.
– Use decentralized communication of updates.
– Full adjacency between switches.
Which configuration is needed to meet these requirements?
A. interface with a type of p2p network
B. stub area between the neighbors
C. filter list between the neighbors
D. virtual link between the neighbors

What is the answer?

An engineer mus! send JSON encoded telemetry data to an external collector. The transport
mechanism must prevent tampenng or forgery of the data. Which protocol accomplishes this goal?
A. GPB
B. HTTP
C. gRPC
D. DTLS
What is the answer?

Any update guys????

An engineer mus! send JSON encoded telemetry data to an external collector. The transport
mechanism must prevent tampenng or forgery of the data. Which protocol accomplishes this goal?
A. GPB
B. HTTP
C. gRPC
D. DTLS
What is the answer?HTTP

An engineer mus! send JSON encoded telemetry data to an external collector. The transport
mechanism must prevent tampering or forgery of the data. Which protocol accomplishes this goal?
A. GPB
B. HTTP
C. gRPC
D. DTLS
What is the answer? DTLS DTLS 1.3 allows client/server applications to communicate over the Internet in a way that is designed to prevent eavesdropping, tampering, and message forgery. The DTLS 1.3 protocol is intentionally based on the Transport Layer Security (TLS) 1.3 protocol and provides equivalent security guarantees